Protect Your Rolex From The First Scratch
LunoGuard is a virtually invisible, precision-cut film engineered for your exact Rolex model. A watch this good deserves more than luck to avoid scratches.
In StockVirtually Invisible Protection, Precision-Cut For Your Rolex Reference
One knock against a doorframe, a car door or a bar top is all it takes to mark up a Rolex. LunoGuard stops it before it happens.
Having a Rolex polished and refinished costs hundreds of dollars each time, and it permanently removes metal from the case. LunoGuard heads off the scratches that lead to that, for a fraction of the cost.
Disappears On Oystersteel
Ultra-clear film that sits flush against the case and bracelet, so your Rolex looks exactly as it did from the boutique.
Self Healing
Light surface marks buff themselves out with a little warmth — sunlight or body heat is usually enough.
Easy Application
No experience needed. Apply the full kit to your Rolex at home in about 15 minutes.
Safe On Steel, Gold & Ceramic
Formulated to be safe on Oystersteel, 18ct gold, platinum, and Cerachrom ceramic bezels alike.
Long Lasting Protection
Backed by a 10-year warranty against yellowing and cracking, for as long as you wear your Rolex.
What Rolex Owners Are Saying
Took a few minutes to line everything up but once it was on you honestly can't tell it's there.
Installation wasn't bad and the case finish looks completely untouched.
Use a light when installing since the film is genuinely hard to see. Really happy with it — doesn't change how the watch looks one bit.
Works as advertised. The spare piece came in handy since I dropped the first one mid-application.
Honestly the application needs a steady hand but it's pretty straightforward. End result looks great and was well worth the effort.
After a day or two I completely forgot it was there, which is exactly what I wanted. No visible edges and it still looks like bare steel.
Thought it might look obvious or plasticky but it's genuinely subtle and does its job well.
On Your Wrist In About 15 Minutes
Clean & prep
Wipe your Rolex down with the included microfibre cloth, then spray the application solution over the case and bracelet to prime them.
Apply the film
Spray both sides of each film piece, align it to its matching surface — case, bezel or bracelet link — then press out any trapped solution and let it bond for 20–30 seconds.
Smooth & dry
Use your finger or the tweezers to push out any remaining bubbles from the centre outward, then let each piece dry for up to 2 minutes before moving to the next.
What Sets LunoGuard Film Apart
LunoGuard
Not Sure Which Rolex Kit You Need?
Every kit is precision-cut to a specific Rolex reference number — Datejust, Submariner, Daytona and more. Confirm yours in 10 seconds.
Find My RolexGuaranteed To Fit — Or It's Free
Every kit is precision-cut to your Rolex's exact reference number — confirm yours matches before you apply anything. If we've sent the wrong fit, we'll replace it or refund you in full. Once applied, it's backed by a 10-year warranty against yellowing and cracking.
Supported Rolex Models and References
Tap a model to see every reference we make a kit for. Each link opens that kit.
Rolex Submariner4 kits
- Submariner 126610also fits 126610LV, 126613, 126618, 126619
- Submariner 116610also fits 116610LV, 116613, 116618, 116619
- Submariner 124060
- Submariner 16610also fits 16610LV, 16613, 16618
Rolex GMT-Master II5 kits
- GMT-Master II 126710 Jubileealso fits 126711, 126713, 126715, 126718, 126719, 126720
- GMT-Master II 126710 Oysteralso fits 126711, 126713, 126715, 126718, 126719, 126720
- GMT-Master II 116710LNalso fits 116710BLNR, 116713, 116718, 116719
- GMT-Master II 16700also fits 16710, 16713, 16718
- GMT-Master II 126715also fits 126718, 126719
Rolex Datejust13 kits
- Datejust 126334 Jubileealso fits 126331, 126333
- Datejust 126334 Oysteralso fits 126331, 126333
- Datejust 126300also fits 126301, 126303
- Datejust 126200also fits 126201, 126203
- Datejust 179383also fits 179174G, 179381, 179384
- Datejust 116233also fits 116200, 116201, 116203, 116231, 116234, 116238, 116243
- Datejust 69318
- Datejust 278383also fits 278381, 278384
- Datejust 279160also fits 279161, 279163
- Datejust 278278also fits 278271, 278273, 278274, 278275, 278279
- Datejust 278274also fits 278240, 278241, 278243, 278271, 278273, 278275, 278278, 278279
- Datejust 279174also fits 279171, 279173, 279175, 279178, 279179
- Datejust 178344also fits 178341, 178343
Rolex Day-Date3 kits
- Day-Date 228345also fits 228348, 228349, 228396
- Day-Date 228238also fits 228206, 228235, 228236, 228239
- Day-Date 128238also fits 128235, 128236, 128239
Rolex Daytona8 kits
- Daytona 126505also fits 126500, 126503, 126506, 126508, 126509
- Daytona 126515also fits 126518, 126519
- Daytona 116506also fits 116500, 116503, 116505, 116508, 116509
- Daytona 116505also fits 116500, 116503, 116506, 116508, 116509
- Daytona 126500also fits 126503, 126505, 126506, 126508, 126509
- Daytona 116519also fits 116515, 116518
- Daytona 116508also fits 116500, 116503, 116505, 116506, 116509
- Daytona 116500also fits 116503, 116505, 116506, 116508, 116509
Rolex Explorer3 kits
- Explorer 124273also fits 124270
- Explorer 216570
- Explorer 224270
Rolex Yacht-Master6 kits
- Yacht-Master 226658also fits 226659
- Yacht-Master 126622also fits 126621
- Yacht-Master 116680also fits 116681, 116688, 116689
- Yacht-Master 268655
- Yacht-Master 268622also fits 268621
- Yacht-Master 126655
Rolex Sky-Dweller5 kits
- Sky-Dweller 326934 Jubileealso fits 326933, 336933, 336934
- Sky-Dweller 326934 Oysteralso fits 326933, 336933, 336934
- Sky-Dweller 326935also fits 326938, 326939, 336935, 336938, 336939
- Sky-Dweller 336235also fits 336238, 336239
- Sky-Dweller 326235also fits 326238, 326239, 336235
Rolex Sea-Dweller3 kits
- Sea-Dweller 126600also fits 126603
- Sea-Dweller 136660also fits 136668
- Sea-Dweller 116600
Rolex Oyster Perpetual5 kits
Rolex Air-King1 kit
Rolex Land-Dweller2 kits
- Land-Dweller 127334also fits 127335, 127336
- Land-Dweller 127234also fits 127235, 127236
Rolex Milgauss1 kit
- Milgauss 116400also fits 116400GV
Common Questions From Rolex Owners
Is it completely invisible on my Rolex?
It's designed to be virtually invisible once applied — optically clear and precision-cut to your Rolex's exact case shape, whether that's Oystersteel, gold or a two-tone reference. Under close inspection in direct light you may notice a very faint edge, but from normal viewing distance it disappears completely.
Does it yellow or crack over time?
No — the film is engineered to resist yellowing and cracking, and it's backed by a 10-year warranty against both.
Is it easy to remove?
Yes. If you ever decide to remove it, we recommend gently warming the film with a hairdryer first — this softens the adhesive and lets it peel away cleanly, without touching your Rolex's finish.
What's included in the kit?
Each kit includes precision-cut film pieces for your exact Rolex reference (plus a spare piece), precision application tweezers, a microfibre cloth, and an application solution spray — everything you need to apply it at home.
Will it fit my exact Rolex?
Every kit is cut to a specific Rolex reference number, not a generic size. If you're not sure yours is covered, use the finder above to confirm before ordering.
How long does application take?
Most kits take about 15 minutes from start to finish, following the 3 steps above. No experience or special tools are required beyond what's included.
What if it doesn't fit?
If your kit doesn't fit before you apply it, contact us and we'll send a replacement or refund you in full — see our fitment guarantee above for details.
What if my reference isn't listed?
We're always adding new Rolex references — currently 110+ and growing. If yours isn't listed yet, submit a request here and we'll notify you as soon as it's available.
Is protection film safe for Rolex steel, gold and ceramic?
Yes. The film is safe on Oystersteel, gold, two tone and platinum cases, and on Cerachrom ceramic bezels. It protects the surface without changing it, and it lifts off cleanly without leaving adhesive residue.
Should I keep the Rolex factory stickers on?
The factory stickers are only there to protect the watch in transit. They aren't shaped for wear, they lift at the edges and they trap dirt and moisture underneath, so most owners take them off. Protection film is made for the job. It is cut to each surface, stays clear and is designed to be worn every day.
What if I send my Rolex for a service or polish?
If you send your watch for a service or polish, remove the film first. Warm it gently with a hairdryer, then peel it away slowly. A spare set is included, or order a fresh kit to reapply afterwards.
More reading: how to apply the film and how to protect a Rolex from scratches.